Posts Tagged ‘2016’

Civil 3D 2016 Service Pack 2

December 3, 2015

The install for Service Pack 2 showed up in my Application Manager.  However, it is not on Autodesk’s website as of yet.  The issues that have been resolved are as follows:

The following issues have been resolved in Autodesk AutoCAD Civil 3D 2016 Service Pack 2:

API

  • An issue with the Profile.CreateFromFeatureLine styleId parameter has been resolved so that a profile style can now be applied as expected.
  • An issue where three LabelStyleCollection.Expressions (CantCriticalPointsLabelStyles, AreaLabelStyles, and FlowSegmentLabelStyles) would display an InvalidOperationException has been resolved.
  • The Label.SetReferenceTextTarget method now works as expected for a surface reference.

Export to DWG/DGN

  • An issue has been resolved where the display order of objects would change when the drawing was exported to DWG or DGN.

General

  • Having Quick Properties enabled no longer causes a selection issue with AutoCAD Civil 3D objects, where the drawing would lose focus and a second click was required to run a command.

Grading and Feature Lines

  • An issue has been resolved where extra vertices were created on some feature lines which impacted the ability to create grading projections from those feature lines. To resolve this issue, run the AUDIT command in any affected drawings after installing the service pack.

Hydraflow Storm Sewers

  • An issue has been resolved where the junction loss was not calculated in Hydraflow Storm Sewers when the flow was supercritical.

Labels

  • An issue has been resolved where parcel labels and tables within an xref would become corrupted if the source drawing was modified.

Object Enabler

  • An issue has been resolved where having the object enabler loaded would cause new objects to be added to a drawing when it was saved, which caused a prompt to be displayed that the drawing needed to be recovered when it was reopened.
  • An issue has been resolved where proxy warnings would appear in Autodesk® AutoCAD LT® when opening a drawing that contained AutoCAD Civil 3D objects even though the AutoCAD Civil 3D object enabler was installed.
  • Note: To download and install the fixes for the object enabler, go to the AutoCAD Civil 3D 2016 Object Enabler website.

Points

  • The point creation commands At Alignment Geometry and Profile Geometry Points now honor the specified start and end stations.

Pipe Networks and Pressure Networks

  • An issue has been resolved where user-defined structure descriptions would change to Null Structure when the part was moved or the invert was changed.
  • An issue has been resolved where pipe invert grips were in the wrong location and had incorrect inverts, and these pipes could not be swapped for other parts.
  • The Set Sump Depth structure rule now runs as expected without displaying an error.
  • Synchronizing data shortcut pipes and structures no longer causes the drawing layer settings to revert to the settings specified on the Object Layers tab of the Drawing Settings dialog box.
  • Linking to a pipe network or pressure network data shortcut in the Link to a Data Shortcut dialog box and then using the UNDO command no longer causes an error.

Surfaces

  • Issues have been resolved with how negative and positive elevation ranges in surface analysis are calculated for a volume surface when there are gaps in the elevation ranges or overlapping elevation ranges.
  • An issue has been resolved with surface analysis where the volume reported in an elevation range was inaccurate if the elevation range exceeded the highest or lowest elevation.

Survey

  • An issue has been resolved where survey figures were exported incorrectly from the survey database.

Autodesk® InfraWorks® 360 Interoperability

  • Alignments and corridors which contain compound spirals are now exported as expected to IMX.
  • An issue has been resolved where an entire Autodesk InfraWorks 360 model would be opened after selecting the Area Of Interest option in the Open InfraWorks 360 Model dialog box.

Autodesk® Vault

  • A drawing with xrefs attached to it and saved with the Save As command can now be checked into Vault.
  • Performance has been improved when checking in files into Vault, refreshing Vault projects, opening read-only drawings that have xrefs attached, and logging into a Vault database that contains several projects.
  • On the Uses tab of the Preview pane in Vault, duplicate drawings no longer appear in the list of files for a drawing that has xrefs attached.
  • An issue has been resolved where point groups in drawings in a Vault project would always be marked with an out-of-date icon in Prospector.


AutoCAD 2016 Service Pack 1

October 1, 2015

Autodesk has released the AutoCAD 2016 Service Pack 1.

This service pack applies to…

AutoCAD and Verticals Products:

  • AutoCAD 2016
  • AutoCAD Architecture 2016
  • AutoCAD Civil 3D 2016
  • AutoCAD Electrical 2016
  • AutoCAD Map 3D 2016
  • AutoCAD Mechanical 2016
  • AutoCAD MEP 2016
  • AutoCAD P&ID 2016
  • AutoCAD Plant 3D 2016
  • AutoCAD Utility Design 2016

Autodesk Design Suites:

  • Autodesk AutoCAD Design Suite 2016
  • Autodesk AutoCAD with Advance Steel 2016
  • Autodesk Building Design Suite 2016
  • Autodesk Factory Design Suite 2016
  • Autodesk Infrastructure Design Suite 2016
  • Autodesk Plant Design Suite 2016
  • Autodesk Product Design Suite 2016
  • Autodesk Revit Collaboration Suite 2016

Download here.

AutoCAD 2016 Hotfix 2

July 22, 2015

Autodesk has released a hotfix 2 for AutoCAD and it’s verticals.

You can download it here.

More New and Updated Solutions

June 29, 2015

Autodesk has released some more new and updated solutions.

General

How to open and view GP4 files in Autodesk software

Submit button does not function correctly in Autodesk Accounts

Installation and Licensing

2016: Resolving installation issues with a clean install of AutoCAD Civil 3D

Error 5: Unable to Install Inventor 2016 UR1 (Yellow Warning Triangle)

How to cleanly uninstall Navisworks 2015.
How to cleanly uninstall Navisworks 2016

How to install the Nastran In-CAD help documentation locally

3ds Max

Importing 12DA files into 3ds Max Design using Civil View

Repair 3ds Max using Windows control panel

Steps to repair 3ds Max

AutoCAD

A Point Cloud with scanned colors is plotted in black only

Find and replace does not find stacked fractions in AutoCAD

How to add the Adobe PDF toolbar to AutoCAD

How to add the NWCOUT function to the AutoCAD Ribbon

How to change drawing from using inches to yards

How to export a sheet list from AutoCAD to Excel

How to protect AutoCAD from Viruses

Multi-sheets Inventor dwg incorrectly represented in Autocad

Publish takes a long time in AutoCAD 2016

AutoCAD Architecture

Railing with glas infill is displayed with incorrect offset

Sheet categories and subsets reorder in AutoCAD Architecture or AutoCAD MEP

Style browser modeless dialog replaces Select Style dialog box in AutoCAD Architecture

AutoCAD Civil 3D

2016: Resolving installation issues with a clean install of AutoCAD Civil 3D

Create feature is not active after right click on a layer in the Display Manager

Grid volume surface elevation analysis hatching not working as expected

How to raise a product enhancement request for Civil 3D

In Civil 3D 2016 where is rendering on ribbon

Object projection of a block to a profile view do not respect the insertion point

AutoCAD MEP

Sheet categories and subsets reorder in AutoCAD Architecture or AutoCAD MEP

Text within ducts do not display in layouts using AutoCAD MEP

AutoCAD Mechanical

There are missing shapes within the AutoCAD Mechanical content library

AutoCAD Plant 3D

AutoCAD Plant 3D: How to round a precision for a field in the database via SQL
AutoCAD Plant 3D: It is not possible to assign a line number tag via property palette
AutoCAD Plant 3D: Ortho creation and update slow

Autodesk 360

A360 Team: Error “Server encountered and unexpected error” when trying to sign into A360 Team

CFD

Can CFD desktop installation utilize cloud solver?

How to match smoke results to the Ringlemann Chart levels

Fusion 360

Does Fusion 360 Write G code

How to clear local user cache in Fusion 360

How to find Crash Recovery Files in Fusion 360

How to open a previously saved version of a Fusion 360 design

How to share a Fusion 360 design

Inventor

A custom frame generator beam with complex section is not cut correctly using “Trim To Frame”

Automated Center Marks do not work on a rectangular pattern of a circular pattern in Inventor 2015

Error 5: Unable to Install Inventor 2016 UR1 (Yellow Warning Triangle)

Error opening Vault Inventor documents in Inventor View: “Cannot find this application on computer”

Inventor 2015 is not allowing certain patterned components to go into certain folders
Inventor 2016 is not exporting text correctly in a PDF
Inventor 2016 is not handling moved spreadsheets for linked parameters.
Inventor 2016’s Detail View is displaying all of the model sketch labels not just the ones in the de…

Showcase Runtime Error R6025 when importing Inventor data
Some Content Center parts are not set to participate in a section view by default in Inventor 2016

Transitions for Video Producer in Inventor 2016 are not working

Unable to turn of visibility of a part

Users reported that Limits-stacked type in Inventor try to enter the values for the upper and lower …

Infrastructure Map Server

AIMS version numbers by Service Pack

InfraWorks

Imported surface data from IMX file has holes in InfraWorks

InfraWorks 2016 R2 downloaded installation file cannot be executed
InfraWorks JavaScript examples: Tiled Model Export

Maya

Custom HUD not updating during playblast

Moldflow

How to set the injection location by coordinate in Moldflow Insight
Moldflow Insight Error 304710: Some of the part cannot be reached by polymer flow

Short shot showing in Simulation Moldflow Insight and not in Simulation Moldflow Adviser

Nastran

How to model contact with shell elements in Autodesk Nastran

Nastran In-CAD

How to install the Nastran In-CAD help documentation locally

Navisworks

How to cleanly uninstall Navisworks 2015.
How to cleanly uninstall Navisworks 2016

Revit

How to create and add custom wall Reveal profiles
Revit | Warning: “While loading Type”.
Revit Accelerator cannot be accessed by user computer
Revit warning upon sync: “Your local file is not compatible with the central model”
Revit: Point Clouds are not printed for certain views
Revit: System slows down when working in Revit
Revit: Transparency and Reflectance rendering incorrectly in the cloud
Revit: Using Revit files on Dropbox, Box, or OneDrive

Robot Structural Analysis

RC SLAB REINFORCEMENT – verification of cracked deflection can only be done for simple load cases

Simulation Mechanical

How to import 2D sketches into Simulation Mechanical for use in 2D analysis types

Simulation Mechanical stuck at Applying Associativity…

VRED

VRED 2016 loses colors when importing a WRL file

Vault

Autodesk Vault Professional 2014 error: ?Workgroup ‘\AUTODESKVAULT’ does not have ownership of this …

Error opening Vault Inventor documents in Inventor View: “Cannot find this application on computer”

Error: “Cannot check in file due to Vault restrictions”

Vault 2014 support for prior Vault clients and add-ins
Vault add-in application compatibility
Vault error: “Restore failed because the backup has products that are not supported by the server”
Vault Error: “There is an error in the XML document” when you check in files to Vault

Don’t Miss Total CAD Systems’ 2016 Rollout Event

June 9, 2015

It’s that time of year again.  This year’s rollout event will be held here at the Total CAD Systems office.  Come get your free breakfast & lunch and see what is new in the 2016 products.  The events will be from June 24-26.

Manufacturing and Plant Solutions June 24th.

Infrastructure Solutions June 25th.

Building Solutions June 26th.

To view the agenda for these events, click on the desired Solution above.

We hope to see you there.  It will be a very informative event and well worth your time.